To set up your VOCOM unit in Wi-Fi wireless mode, follow these steps:

1. Initial Connection: Connect the VOCOM unit to your PC and vehicle using a USB cable (ensure the vehicle's key is off).

2. Access Settings: Click on the Settings button.

3. Configuration Menu: In the Settings menu, click on the Configuration button. The Settings window will open. Select WiFi.

4. Identify the Communication Unit: Enter a name of your choice for the configured communication unit (e.g., "Garys_Adapter" or "VCforJA") and select OK.
Note: If you have multiple VOCOMs, each unit needs a unique configuration and name. If the device is already configured, a confirmation message will prompt you to either load the existing configuration or set up a new one.

5. Select Configuration: Choose Configuratio.

6. Connection Type: Under Connection Type, select Access Point. To complete the setup, your IT personnel will need to enter data for the volvo vocom ii to connect to your wireless router.

7. Save Settings: Click Save to finalize the configuration.

Note: You can choose from three different security levels in the drop-down list. Ensure the settings align with the specifications of your wireless router.

8. Enable the Configuration: Select the newly configured VOCOM WLAN communication unit. Click the Enable button and then click OK to close the Settings window.

9. Unplug USB Cable: Once the USB cable is unplugged, the VOCOM will switch to Wi-Fi mode.

Note: The product page will indicate that VOCOM is connected via Wi-Fi. Reconnecting the USB cable to your PC will switch VOCOM back to USB mode.

Posted by: Emily white at 04:51 AM | No Comments | Add Comment
Post contains 272 words, total size 2 kb.